飞轮微振动的组合隔振装置设计及实验研究

针对光学遥感卫星飞轮微振动引起的成像质量下降问题，设计了一种组合隔振装置，并采用仿真分析与实验测试相结合的方法对隔振方案设计的合理性进行验证。首先，将测量的飞轮扰振数据引入光学卫星的有限元模型中，计算出飞轮扰振对光学相机的像素偏移影响；其次，设计了组合隔振方案并基于有限元方法对其隔振效果进行验证；最后，搭建了光学成像微振动实验测试平台，对不同转速下飞轮微振动造成的像素偏移影响进行精确测量。实验结果表明，组合隔振装置对300 Hz以上高频段飞轮扰振有较大衰减作用，最大像素偏移降到0.01个像素以下，隔振效率达到80%以上；通过对比可知，实验测试与仿真计算得到的像素偏移结果在低频段一次谐波响应及模态响应表现出较好一致性，但在高频段二者存在一定偏差。     

Properties and performance of extended target motion analysis

The problem of target motion analysis (TMA) has been the subject of an important literature. However, present methods use data estimated by a short time analysis (azimuths, Dopplers, etc.). For far sources, the nonstationarities of the array processing outputs, induced by the sources motion, may be simply modeled. This model leads one to consider directly a spatio-temporal TMA. Then new (spatio-temporal) data can be estimated. These estimates correspond to a long time analysis. Further, note that they are estimated independently of the (classical) bearings. In this general framework, the concept of source trajectory replaces the classical instantaneous bearings. Corresponding TMA algorithms are then studied. Then the study of statistical performance is carefully studied     

How Operational Oceanography Can Benefit from Dynamic Topography Estimates as Derived from Altimetry and Improved Geoid

With a precise geoid, GOCE will allow an estimation of absolute dynamic topography from altimetry. The projected benefits to operational oceanography and its applications are analyzed herein. After a brief overview of operational oceanography, we explain how the new geoids will be used in the future to improve real time altimeter products and to better constrain modelling and data assimilation systems. A significant impact is expected both for mesoscale (e.g. better estimations and forecasts of currents for pollution monitoring, marine safety, offshore industry) and climate (better initialization of coupled ocean/atmosphere models) applications. This revised version was published online in August 2006 with corrections to the Cover Date.     

Active damping control of vibrational systems

The problem of vibration suppression in large flexible space structure (LFSS) is investigated. Based on the structure property of LFSS, an active damping strategy is proposed to effectively attenuate the critical vibrations of the structure subject to modeling uncertainty and external disturbance. Control algorithms are derived with the aim of suppressing both the vibrating magnitude and vibrating rate to an acceptable level. It is shown that the strategy exhibits robust and adaptive properties and is truly model-independent. The novelty of the proposed approach lies in the fact that it is fairly easy to set up the strategy and the overall computation involved is much less than any other strategies available to date. A two-bay truss is used to verify the validity of the proposed approach     

Intrinsic time scale for reconnection on the dayside magnetopause

Recently much attention has been focused on the transient behavior of the magnetopause in response to pressure pulses and southward fluctuations of the interplanetary magnetic field. We examine the motion of the magnetopause behind the foreshock and conclude that this motion is affected by foreshock pressure variations but not by fluctuations in the direction of the magnetic field. Neither magnetopause erosion nor flux transfer event occurrence is controlled by the foreshock. On the contrary, flux transfer events occur at times of steady IMF and thier quasi-periodic behavior is controlled by the magnetopause or the magnetosphere and is not driven by the external boundary conditions. Since flux transfer events are clearly due to reconnection, this observation implies that the IMF must be southward some time perhaps as long as 7 minutes before flux transfer begins.     

煤体变形局部化的梯度塑性理论研究

本文采用白光数字散斑相关方法对煤在单轴压缩下变形破坏进行研究,定量的测出了煤的变形局部化带宽度.并通过应变梯度塑性理论,在屈服函数中引入应变梯度二阶项.采用Drucker-Prager准则解析得出了煤试件的变形局部化带宽度公式并根据试验确定煤的材料内部长度.     

样条函数在轨道计算中的应用

提出了在已知现速度的情况下，用样条函数计算视加速度的新方法，避免了传统牛顿插值法的不可靠性及由此而产生轨道重构错误的缺点，仿真结果表明用样条函数法重构的轨道精度明显优于牛顿插值法。     

双波束天线阵时空调制OFDM通信测向方法

为解决利用通信信号的测向和通信定位综合设计问题,提出了一种载有方向信息的OFDM时空调制技术。该技术采用两副同中心但方向图有偏差的特殊天线阵列发射,使单天线接收机接收的信号是OFDM特性,每个OFDM子载波调制信号载有空间方位信息和数字通信信息,接收机通过解调信号即可通信测向。文中详细介绍了非正交四相和非均匀八相子载波时空调制信号设计思想,阐述了子载波间伪随机码空间调制编码方法,给出了数据信息调解和方位角估计算法。计算机仿真结果表明:在高斯信道下系统的误码性能与普通PSK-OFDM一样,实现了在调制信号设计层面上的数字通信与测向的深度综合。     

齿轮抗弯曲疲劳可靠度预测的方法

把齿轮弯曲疲劳失效处理成随机事件，以这个随机事件为研究对象，用齿轮抗弯曲疲劳的累积损伤强度ＫＷ和总疲劳损伤量ＤＷ来描述弯曲疲劳失效随机事件，得出用概率描述的弯曲疲劳的疲劳累积损伤模型。用这个计算模型，提出齿轮抗弯曲疲劳可靠度预测的方法。     

星载有效载荷印制插件板的力学设计

根据星载有效载荷的工作环境及其印刷插件板的设计形式，对有／无加强筋的印制插件权分别用空间飞行器结构有限元分析程序（ＥＤＡＳＳ）进行仿真试验和力学分析，同时也进行了实物振动试验。最后对两种试验的结果进行了比较。